BGP 配置实例

frtyeee

screen.width-333)this.width=screen.width-333" border=0>CAT 1 CAT1> (enable) show running-config begin ! # ***** NON-DEFAULT CONFIGURATION ***** ! ! #version 6.3(5) ! #system set system name CAT1 set system highavailability enable !-- Enables high availability on Catalyst switch. ! #vtp set vtp domain cisco set vlan 1 name default type ethernet mtu 1500 said 100001 state active [..] set vlan 10,20 ! #set boot command set boot config-register 0x2102 set boot system flash bootflash:cat6000-sup.6-3-5.bin ! #module 3 : 48-port 10/100BaseTX Ethernet set vlan 10 3/2 !-- Port 3/2 is connected to AS10 on VLAN 10. ! #module 5 : 8-port 1000Ba*** Ethernet set module name 5 set trunk 5/2 on isl 1-1005,1025-4094 !-- Port 5/2 is connected to CAT 2 as Trunk. ! #module 15 : 1-port Multilayer Switch Feature Card !-- MSFC #1 on Port 1, Mod 15. ! #module 16 : 1-port Multilayer Switch Feature Card !-- MSFC #2 on Port 2, Mod 16. CAT 2 CAT2 (enable) show running-config begin ! # ***** NON-DEFAULT CONFIGURATION ***** ! ! #version 6.3(5) ! #system set system name CAT2 set system highavailability enable !-- Enables high availability on Catalyst switch. ! #vtp set vtp domain cisco set vlan 1 name default type ethernet mtu 1500 said 100001 state active set vlan 10,20 ! #set boot command set boot config-register 0x2102 set boot system flash bootflash:cat6         1/5 12345下一页尾页